Sharpening tools are often treated as an afterthought in the workshop, yet a dull edge ruins fine craftsmanship faster than anything else. I have researched the options and combed through buyer feedback to rank these Robert Sorby choices. In my view, buying the right abrasive system saves hours of frustration. Let us see how they stack up in performance.
| Best For | Product | Name | Score | |
|---|---|---|---|---|
| Complete Sharpening Setup | ![]() |
Robert Sorby ProEdge Sharpening System, Large, Black, WPROEDGE110USA | View on Amazn | |
| Premium Metal Removal | ![]() |
Robert Sorby Proedge Diamond Belt | View on Amazn | |
| Ultra Fine Polishing | ![]() |
Sorby ProEdge Trizact Belt, 600 Grit | View on Amazn | |
| Heavy Stock Removal | ![]() |
Robert Sorby Proedge Zirconium Belt 120 Grit | View on Amazn | |
| Long Kitchen Knives | ![]() |
Robert Sorby # WPEKJIGL Proedge Knife Sharpening Jig Large For Knives Over 8” Long | View on Amazn | |
| Pocket And Paring | ![]() |
Robert Sorby #WPEKJIGS Proedge Knife Sharpening Jig Small for Knives Less | View on Amazn | |
| Bowl And Spindle Gouges | ![]() |
Robert Sorby # PEFPKIT Proedge Fingernail Profiling KIt Fits Proedge Sharpening System for Spindle and Bowl Gouges | View on Amazn |
1. Robert Sorby ProEdge Sharpening System, Large, Black, WPROEDGE110USA
The Robert Sorby ProEdge Sharpening System earned the top spot in my ranking because of its repeatable angle settings, which eliminate the guesswork that normally ruins expensive woodworking tools. You simply select the preset angle for your chisel or gouge, lock the platform, and achieve a hollow grind in seconds. In my view, this precise mechanical consistency is what separates professional results from amateur frustration.
The motor runs quietly and changes speeds smoothly, while the innovative belt design allows you to swap abrasives in less time than it takes to make a cup of coffee. I appreciate how the rugged chassis absorbs vibration during heavy grinding sessions without shifting across the workbench. But you should remember that this base unit is only the starting point, and you will need to invest in specialized jigs for specific tasks.
Buyers frequently praise the system for bringing new life to neglected workshop tools with minimal effort.
Users appreciate the sturdy build quality, noting that the machine feels like a permanent workshop investment.
A common observation among woodworkers is that switching belts takes mere seconds once you get the hang of the lever mechanism.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
2. Robert Sorby Proedge Diamond Belt
This accessory suits the woodworker who demands surgical precision and works with heavily cemented carbide or high-speed steel that chews up standard aluminum oxide belts. If you regularly restore antique plane irons or shape difficult modern alloys, this abrasive is your best friend. In my opinion, the investment pays for itself by holding a flat surface longer than traditional paper or cloth options.
Diamond abrasives cut cooler than conventional materials, protecting your temper lines from accidental overheating and bluing. I find the rigid backing wonderfully stable when you apply moderate pressure for aggressive shaping work. But diamond belts carry a steeper price tag, and you must use them with care to avoid wearing out the coating prematurely.
Reviewers often highlight how long these diamond belts last compared to standard abrasive alternatives.
Users note that the aggressive cutting action requires a lighter touch to avoid taking off too much metal.
Woodworkers restoring vintage tools find the flat, crisp bevels produced by this belt exceptionally rewarding.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
3. Sorby ProEdge Trizact Belt, 600 Grit
Trizact technology uses microscopic pyramids of abrasive that wear down uniformly, creating a mirror-like polish that feels almost magical on fine carving tools. When you inspect the belt closely, the textured surface looks more like velvet than traditional sandpaper. I think this engineering marvel is worth every penny for anyone chasing a truly hair-popping edge.
This fine grit bridges the gap between rough shaping and final stropping, leaving your bevels smooth and free of deep scratches. In my judgment, skipping this step means missing out on the effortless wood-cutting performance your tools deserve. But you must remember that a 600-grit belt removes very little metal, so your primary shaping work needs to happen beforehand.
Craftspeople note that carving tools glide through hardwood effortlessly after finishing on this belt.
Buyers appreciate the consistent scratch pattern left behind, which makes final buffing much faster.
Users mention that the belt lasts through dozens of tool touch-ups before showing signs of wear.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
4. Robert Sorby Proedge Zirconium Belt 120 Grit
The most common buyer complaint regarding this abrasive is that it cuts too aggressively for delicate touch-ups, leaving deep gouges if you linger too long on the metal. Yet this exact trait makes it the ultimate workhorse for reshaping severely damaged bevels or grinding new profiles from scratch. I consider this zirconium belt an essential rescue tool for abused chisels.
The tough backing resists tearing even when you press hard against the edge, and the mineral grains fracture continuously to expose fresh cutting edges. In my assessment, having a pack of these nearby saves you from burning out your patience on finer grits. But you must pay close attention to heat buildup, because coarse belts remove metal fast enough to draw the temper if you force the tool.
Woodworkers restoring heavily chipped blades rely on this belt to establish a fresh bevel quickly.
Buyers advise using a light touch to prevent the aggressive grit from removing more material than intended.
Users note that the belt material holds up remarkably well against fraying at the edges.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
5. Robert Sorby # WPEKJIGL Proedge Knife Sharpening Jig Large For Knives Over 8” Long
Comparing this large knife jig to the smaller variant above reveals a tool designed specifically for long blades, offering extended support that prevents the tip of a chef knife from dipping during strokes. While the smaller jig handles pocket knives, this larger frame cradles carving blades and slicers with unwavering stability. I prefer this setup for kitchen cutlery because it secures the entire length of the blade without flex.
The clamping mechanism holds the spine securely, allowing you to set a repeatable bevel angle across wide culinary blades. In my view, achieving a factory-fresh edge on a ten-inch slicer becomes remarkably straightforward with this dedicated hardware. But the bulky frame requires careful storage, and it takes a few practice runs to balance long blades comfortably within the carriage.
Home cooks and professional chefs praise the jig for restoring dull kitchen knives to a razor-sharp finish.
Users note that the solid clamping prevents blade chatter during the grinding process.
Reviewers highlight the ease of maintaining a consistent bevel angle on blades over eight inches long.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
6. Robert Sorby #WPEKJIGS Proedge Knife Sharpening Jig Small for Knives Less
This jig built its reputation on precision and ease of use, becoming a favorite among pocketknife collectors and kitchen enthusiasts alike. Assessing that reputation against actual performance shows that the compact design delivers on its promise of safe, repeatable small-blade sharpening. I find the sturdy little clamp ideal for managing blades that usually slip out of standard sharpening rigs.
The unit locks onto shorter blades securely, keeping your fingers safely away from the moving abrasive belt. In my judgment, anyone who maintains pocket folders or paring knives will save immense amounts of time using this accessory. But you must handle the adjustment screws with care, as overtightening can mar the finish of delicate handle materials.
Owners of pocket knives note that getting a razor edge on small blades is finally effortless.
Buyers appreciate the safety aspect, keeping knuckles well away from the abrasive belt.
Users mention that the learning curve for setup is short and intuitive.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
7. Robert Sorby # PEFPKIT Proedge Fingernail Profiling KIt Fits Proedge Sharpening System for Spindle and Bowl Gouges
This profiling kit earned its high placement through its exceptional ability to create consistent fingernail grinds on bowl and spindle gouges every single time. Turning tools require precise geometry to cut cleanly, and freehand sharpening often leads to asymmetric wings that catch in the wood. I consider this jig an absolute lifesaver for woodturners who want repeatable, factory-standard tool shapes.
The sliding arm locks your gouge at the exact projection and rotation required for sweeping fingernail profiles. In my opinion, mastering this jig eliminates the anxiety of reshaping expensive turning steel. But the assembly requires careful calibration out of the box, and you will need to follow the setup instructions closely to avoid unexpected bevel angles.
Woodturners consistently report that their bowl gouges perform better and last longer with this profiling jig.
Buyers note that replicating a complex fingernail grind takes seconds once the jig is dialed in.
Users appreciate the sturdy construction, which holds up to daily use in busy turning studios.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
Choosing Between Them
The Robert Sorby ProEdge Sharpening System is my top recommendation for woodworkers who want a complete sharpening setup that takes the guesswork out of maintenance. If you work with specialized materials, you can pair it with the Robert Sorby Proedge Diamond Belt for tough carbide or the Sorby ProEdge Trizact Belt for a mirror polish. Kitchen knife enthusiasts will love the Large Knife Sharpening Jig, while turners should immediately add the Fingernail Profiling Kit to their bench.
While this system delivers unmatched versatility, you should remember that unlocking its full potential requires purchasing individual belts and jigs separately. The base machine is a substantial investment on its own, and outfitting it for every specialized workshop task will increase your total budget. Yet for the time saved and the precision achieved, I believe the modular approach is well worth the cost.
As an Amazon Associate, this site earns from qualifying purchases. Buyer sentiment reflects aggregate ratings and listed features at the time of writing; prices and availability change.

James Morris is a passionate writer and researcher who explores Norse culture, Viking history, mythology, and related products to create helpful guides and reviews for readers.







